Integrated photon pair source based on a silicon nitride micro-ring resonator for quantum memories.

We report the design of an integrated photon pair source based on spontaneous four-wave mixing (SFWM), implemented in an integrated micro-ring resonator in the silicon nitride platform (Si3N4). The signal photon is generated with emission at 606 nm and bandwidth of 3.98 MHz, matching the spectral properties of praseodymium ions (Pr), while the idler photon is generated at 1430.5 nm matching the wavelength of a CWDM channel in the E-band. This novel, to the best of our knowledge, device is designed to interact with a quantum memory based on a Y2SiO5 crystal doped with Pr3+ ions, in which we used cavity-enhanced SFWM along with dispersion engineering to reach the required wavelength and the few megahertz signal photon spectral bandwidth.

Bistability between π-diradical open-shell and closed-shell states in indeno[1,2-a]fluorene.

Indenofluorenes are non-benzenoid conjugated hydrocarbons that have received great interest owing to their unusual electronic structure and potential applications in nonlinear optics and photovoltaics. Here we report the generation of unsubstituted indeno[1,2-a]fluorene on various surfaces by the cleavage of two C-H bonds in 7,12-dihydroindeno[1,2-a]fluorene through voltage pulses applied by the tip of a combined scanning tunnelling microscope and atomic force microscope. On bilayer NaCl on Au(111), indeno[1,2-a]fluorene is in the neutral charge state, but it exhibits charge bistability between neutral and anionic states on the lower-workfunction surfaces of bilayer NaCl on Ag(111) and Cu(111). In the neutral state, indeno[1,2-a]fluorene exhibits one of two ground states: an open-shell π-diradical state, predicted to be a triplet by density functional and multireference many-body perturbation theory calculations, or a closed-shell state with a para-quinodimethane moiety in the as-indacene core. We observe switching between open- and closed-shell states of a single molecule by changing its adsorption site on NaCl.

Soluble B-cell maturation antigen in multiple myeloma.

B-cell maturation antigen (BCMA) has emerged as a promising immunotherapeutic target in multiple myeloma (MM) management, with the successive approval of antibody-drug conjugates, bispecific antibodies, and chimeric antigen receptor T-cell therapies directed to this membrane receptor. Soluble BCMA (sBCMA), a truncated version produced through gamma-secretase cleavage, can be quantified in serum/plasma samples from patients with MM via electrochemiluminescence, fluorescence, or enzyme-linked immunosorbent assays, as well as through mass spectrometry-based proteomics. Besides its short serum half-life and independence from kidney function, sBCMA represents a reliable and convenient tool for MM monitoring in patients with nonsecretory or oligosecretory disease. Numerous studies have suggested a potential utility of this bioanalyte in the risk stratification of premalignant plasma cell disorders, diagnosis and prognostication of MM, and response evaluation following anti-myeloma therapies. In short, sBCMA might be the "Swiss army knife" of MM laboratory testing, but is it ready for prime time?

Minimum conditions for accurate modeling of urea production via co-electrolysis.

Co-electrolysis of carbon oxides and nitrogen oxides promise to simultaneously help restore the balance of the C and N cycles while producing valuable chemicals such as urea. However, co-electrolysis processes are still largely inefficient and numerous knowledge voids persist. Here, we provide a solid thermodynamic basis for modelling urea production via co-electrolysis. First, we determine the energetics of aqueous urea produced under electrochemical conditions based on experimental data, which enables an accurate assessment of equilibrium potentials and overpotentials. Next, we use density functional theory (DFT) calculations to model various co-electrolysis reactions producing urea. The calculated reaction free energies deviate significantly from experimental values for well-known GGA, meta-GGA and hybrid functionals. These deviations stem from errors in the DFT-calculated energies of molecular reactants and products. In particular, the error for urea is approximately -0.25 ± 0.10 eV. Finally, we show that all these errors introduce large inconsistencies in the calculated free-energy diagrams of urea production via co-electrolysis, such that gas-phase corrections are strongly advised.

Orbital-symmetry effects on magnetic exchange in open-shell nanographenes.

Open-shell nanographenes appear as promising candidates for future applications in spintronics and quantum technologies. A critical aspect to realize this potential is to design and control the magnetic exchange. Here, we reveal the effects of frontier orbital symmetries on the magnetic coupling in diradical nanographenes through scanning probe microscope measurements and different levels of theoretical calculations. In these open-shell nanographenes, the exchange energy exhibits a remarkable variation between 20 and 160 meV. Theoretical calculations reveal that frontier orbital symmetries play a key role in affecting the magnetic coupling on such a large scale. Moreover, a triradical nanographene is demonstrated for investigating the magnetic interaction among three unpaired electrons with unequal magnetic exchange, in agreement with Heisenberg spin model calculations. Our results provide insights into both theoretical design and experimental realization of nanographene materials with different exchange interactions through tuning the orbital symmetry, potentially useful for realizing magnetically operable graphene-based nanomaterials.

Flowered Grain Quality and Phytochemical Content of Non-Conventional Maize Hybrids from the Mexican Subtropics across Three Growing Cycles.

Development of non-conventional hybrids responds to the demand for the Elotes Occidentales land-race for production of pozole. The effect of growing cycle (2019, 2020, and 2021) on physical characteristics, flowered grain quality, and phytochemical content of two non-conventional hybrids of pozolero maize, as well as the effect of the presence or absence of pedicel, type of pollination (open and controlled, 2019), and parents (female and male, 2020) on flowered grain quality and content of phytochemical compounds, were evaluated. Size, hardness, color, total phenols, and anthocyanins in unprocessed grain were determined. Yield, volume, and puncture force were measured in flowered grain. Results were analyzed with a factorial arrangement in a completely randomized design. There were significant differences (p ≤ 0.05) in most of the variables studied by effect of crop cycle and hybrid. Non-conventional hybrids had large grains (40 g 100 grains-1), soft endosperm (flotation index > 60), pink-purple color, and phenol and anthocyanin contents similar to those reported for the Elotes Occidentales land-race. The presence or absence of the pedicel did not affect flowered grain quality. Controlled pollination favored anthocyanin synthesis. The female parent determined the anthocyanin content of non-conventional hybrids. Thermal processing reduced anthocyanins by 60%; however, they leached into the flowering broth, so that the pozole made from non-conventional hybrids can have improved nutraceutical value, relative to that of pozole made with Cacahuacintle land-race.

Revisiting the role of alkylating agents in multiple myeloma: Up-to-date evidence and future perspectives.

From the 1960s to the early 2000s, alkylating agents (e.g., melphalan, cyclophosphamide, and bendamustine) remained a key component of standard therapy for newly-diagnosed or relapsed/refractory multiple myeloma (MM). Later on, their associated toxicities (including second primary malignancies) and the unprecedented efficacy of novel therapies have led clinicians to increasingly consider alkylator-free approaches. Meanwhile, new alkylating agents (e.g., melflufen) and new applications of old alkylators (e.g., lymphodepletion before chimeric antigen receptor T-cell [CAR-T] therapy) have emerged in recent years. Given the expanding use of antigen-directed modalities (e.g., monoclonal antibodies, bispecific antibodies, and CAR-T therapy), this review explores the current and future role of alkylating agents in different treatment settings (e.g., induction, consolidation, stem cell mobilization, pre-transplant conditioning, salvage, bridging, and lymphodepleting chemotherapy) to ellucidate the role of alkylator-based regimens in modern-day MM management.

Studies of the transition between amplified spontaneous emission and optical lasing in ultrahigh-Q polymeric micro-pedestals.

In this work, we demonstrate the properties of Rhodamine B-doped polymeric cylindrical microlasers to perform either as gain amplification devices through amplified spontaneous emission (ASE) or as optical lasing gain devices. A study based on different %wt concentrations of microcavity families with distinct geometrical features demonstrates the characteristic dependence on either gain amplification phenomena. Principal component analysis (PCA) discriminates the relationship between the main ASE and lasing properties and the geometrical aspects of the cavity families. ASE and optical lasing thresholds were found, respectively, as low as 0.2 µJcm-2 and 0.1 µJcm-2 passing the best-reported microlaser performances in literature for cylindrical cavities, even in comparison with those based on 2D patterns. Moreover, our microlasers showed ultrahigh Q-factor of ∼3 × 106, and for the first time, to the best of our knowledge, a visible emission comb constituted by above a hundred peaks at 40 µJcm-2 with a registered free spectral range (FSR) of 0.25 nm corroborated through the whispery gallery mode (WGM) theory.

Automated versus Chemically Intuitive Deconvolution of Density Functional Theory (DFT)-Based Gas-Phase Errors in Nitrogen Compounds.

Catalysis models involving metal surfaces and gases are regularly based on density functional theory (DFT) calculations at the generalized gradient approximation (GGA). Such models may have large errors in view of the poor DFT-GGA description of gas-phase molecules with multiple bonds. Here, we analyze three correction schemes for the PBE-calculated Gibbs energies of formation of 13 nitrogen compounds. The first scheme is sequential and based on chemical intuition, the second one is an automated optimization based on chemical bonds, and the third one is an automated optimization that capitalizes on the errors found by the first scheme. The mean and maximum absolute errors are brought down close to chemical accuracy by the third approach by correcting the inaccuracies in the NNO and ONO backbones and those in N-O and N-N bonds. This work shows that chemical intuition and automated optimization can be combined to swiftly enhance the predictiveness of DFT-GGA calculations of gases.

"Inner clocks" of glass-forming liquids.

Providing a physically sound explanation of aging phenomena in non-equilibrium amorphous materials is a challenging problem in modern statistical thermodynamics. The slow evolution of physical properties after quenches of control parameters is empirically well interpreted via the concept of material time (or internal clock) based on the Tool-Narayanaswamy-Moynihan model. Yet, the fundamental reasons of its striking success remain unclear. We propose a microscopic rationale behind the material time on the basis of the linear laws of irreversible thermodynamics and its extension that treats the corresponding kinetic coefficients as state functions of a slowly evolving material state. Our interpretation is based on the recognition that the same mathematical structure governs both the Tool model and the recently developed non-equilibrium extension of the self-consistent generalized Langevin equation theory, guided by the universal principles of Onsager's theory of irreversible processes. This identification opens the way for a generalization of the material-time concept to aging systems where several relaxation modes with very different equilibration processes must be considered, and partially frozen glasses manifest the appearance of partial ergodicity breaking and, hence, materials with multiple very distinct inner clocks.

Synthesis of a Curing Agent Derived from Limonene and the Study of Its Performance to Polymerize a Biobased Epoxy Resin Using the Epoxy/Thiol-Ene Photopolymerization Technique.

This study describes the synthesis of a curing agent derived from limonene as well as its application to prepare biobased thermoset polymers via the epoxy/thiol-ene photopolymerization (ETE) method. A biobased commercial epoxy resin was used to synthesize a crosslinked polymeric matrix of polyether-polythioether type. The preparation of the curing agent required two steps. First, a diamine intermediate was prepared by means of a thiol-ene coupling reaction between limonene and cysteamine hydrochloride. Second, the primary amino groups of the intermediate compound were alkylated using allyl bromide. The obtained ditertiary amine-functionalized limonene compound was purified and characterized by FTIR and NMR spectroscopies along with GC-MS. The curing agent was formulated with a tetrafunctional thiol in stoichiometric ratio, and a photoinitiator at 1 mol % concentration, as the components of a thiol-ene system (TES). Two formulations were prepared in which molar concentrations of 30 and 40 mol % of the TES were added to the epoxy resin. The kinetics of the ETE photopolymerizations were determined by means of Real-Time FTIR spectroscopy, which demonstrated high reactivity by observing photopolymerization rates in the range of 1.50-2.25 s-1 for the epoxy, double bonds and thiol groups. The obtained polymers were analyzed by thermal and thermo-mechanical techniques finding glass transition temperatures (Tg) of 60 °C and 52 °C for the polymers derived from the formulations with 30 mol % and 40 mol % of TES, respectively. Potential applications for these materials can be foreseen in the area of coatings.

Extraction of Lipophilic Antioxidants from Native Tomato Using Green Technologies.

Research background: Tomato (Solanum lycopersicum L.) fruit is highly consumed worldwide and contains high amounts of carotenoids and tocopherols, two powerful antioxidants. Native tomato genotypes are rarely used in large-scale market but serve as a reservoir to diversify the species gene pool and can be employed to obtain functional compounds. Extraction methods are currently changing towards cleaner procedures that are more efficient and environmentally friendly, including avoiding toxic or polluting solvents. Experimental approach: In this study, factorial and fractional factorial designs were used to evaluate the efficiency of digestive enzymes, sonication and green solvents to obtain lipophilic antioxidant extracts from native tomato. To monitor the efficiency of the extraction process, spectrophotometric quantification of total carotenoids and antioxidant activity was carried out, and then individual quantification of carotenoids and tocopherols in the extracts was done by HPLC. Results and conclusions: Digestive enzymes and sonication increased the carotenoid content and the antioxidant activity of the obtained extracts when applied individually. However, when these treatments were applied together and in combination with isopropyl acetate, a green solvent, the obtained extracts had the highest carotenoid and tocopherol contents as well as the maximal antioxidant activity. A correlation analysis suggested that antioxidant activity resulted from synergistic effects rather than individual compounds. Tomato extracts were obtained through a rapid and environmentally friendly extraction method and their antioxidant activity was enhanced. Novelty and scientific contribution: Tomato fruits have been the subject of numerous studies; however, functional compound extraction through environmentally friendly methods remains an attractive use of native tomato fruit, enhancing its limited production and harnessing a large amount of tomato product industry. There are few reports where environmentally friendly extraction methods are combined; even rarer are those where green solvents are also used. In this work, the combination of different environmentally friendly extraction methods improved the extraction of carotenoids and tocopherols and allowed to establish a more efficient process. These results could stimulate the use of clean technologies and make the native tomato more attractive for industrial or compound extraction processes.

Photopolymerizable dental composite resins with lower shrinkage stress and improved hydrolytic and hygroscopic behavior with a urethane monomer used as an additive.

This work reports the synthesis of a monomer 2-((2-(3-(prop-1-en-2-yl)phenyl)propan-2-yl)carbamoyl)oxy)ethyl methacrylate (MVTPM) and the evaluation of its performance as an additive in the formulation of Bis-GMA/TEGDMA based composite resins. Experimental composite resins formulated with the MVTPM monomer were compared with a control reference. Double bond conversion, polymerization kinetics, shrinkage and associated stress, sorption, and aqueous solubility, cell viability, as well as mechanical properties were evaluated according to international measurements standards. The experimental composite resins show comparable mechanical properties with the control reference and improvements in other properties, such as better hydrolytic and hygroscopic behavior and lower shrinkage stress, are reported. This makes MVTPM monomer potentially useful in the formulation of dental composite resins.

Fabrication of Woven Jute Fiber Epoxy Bio-Composites through the Epoxy/Thiol-Ene Photopolymerization Technique.

An eco-friendly epoxy/thiol-ene photopolymerization (ETEP) process was employed to prepare epoxy bio-composites using a commercial biobased epoxy resin and a woven jute fabric as reinforcement. In this process the components of the thiol-ene system, an allyl-functionalized ditertiary amine curing agent, a multifunctional thiol and a radical photoinitiator, were added to the epoxy resin to produce a polyether-polythioether crosslinked co-network. Moreover, the jute fibers were functionalized with thiol groups using the 3-mercaptopropyl (trimethoxysilane) with the purpose of creating a chemically bonded polymeric matrix/fiber system. The obtained bio-composites prepared with the thiol-functionalized cellulose fibers exhibited an increase up to 52% and 40% in flexural modulus and strength with respect to the non-functionalized counterparts. Under the three-point bending loadings, the composites displayed higher deformation at break and toughness due to the presence of polythioethers in the co-network. The prepared bio-composites developed in this work are excellent candidates to extend the use of cellulose fibers for structural applications.

Continuous organelle separation in an insulator-based dielectrophoretic device.

Heterogeneity in organelle size has been associated with devastating human maladies such as neurodegenerative diseases or cancer. Therefore, assessing the size-based subpopulation of organelles is imperative to understand the biomolecular foundations of these diseases. Here, we demonstrated a ratchet migration mechanism using insulator-based dielectrophoresis in conjunction with a continuous flow component that allows the size-based separation of submicrometer particles. The ratchet mechanism was realized in a microfluidic device exhibiting an array of insulating posts, tailoring electrokinetic and dielectrophoretic transport. A numerical model was developed to elucidate the particle migration and the size-based separation in various conditions. Experimentally, the size-based separation of a mixture of polystyrene beads (0.28 and 0.87 µ$\umu $ m) was accomplished demonstrating good agreement with the numerical model. Furthermore, the size-based separation of mitochondria was investigated using a mitochondria mixture isolated from HepG2 cells and HepG2 cells carrying the gene Mfn-1 knocked out, indicating distinct size-related migration behavior. With the presented continuous flow separation device, larger amounts of fractionated organelles can be collected in the future allowing access to the biomolecular signature of mitochondria subpopulations differing in size.

Non-equilibrium relaxation and aging in the dynamics of a dipolar fluid quenched towards the glass transition.

The recently developed non-equilibrium self-consistent generalized Langevin equation theory of the dynamics of liquids of non-spherically interacting particles [2016J. Phys. Chem. B1207975] is applied to the description of the irreversible relaxation of a thermally and mechanically quenched dipolar fluid. Specifically, we consider a dipolar hard-sphere liquid quenched (attw= 0) from full equilibrium conditions towards different ergodic-non-ergodic transitions. Qualitatively different scenarios are predicted by the theory for the time evolution of the system after the quench (tw> 0), that depend on both the kind of transition approached and the specific features of the protocol of preparation. Each of these scenarios is characterized by the kinetics displayed by a set of structural correlations, and also by the development of two characteristic times describing the relaxation of the translational and rotational dynamics, allowing us to highlight the crossover from equilibration to aging in the system and leading to the prediction of different underlying mechanisms and relaxation laws for the dynamics at each of the glass transitions explored.